User manual SONY VAIO VPC-CW17FX/B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-CW17FX/B. We hope that this SONY VAIO VPC-CW17FX/B user guide will be useful to you.


SONY VAIO VPC-CW17FX/B : Download the complete user guide (2913 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPC-CW17FX/B QUICK START GUIDE (1795 ko)
   SONY VAIO VPC-CW17FX/B DATASHEET (583 ko)
   SONY VAIO VPC-CW17FX/B QUICK START GUIDE (1795 ko)
   SONY VAIO VPC-CW17FX/B HARD DISK DRIVE REPLACEMENT INSTRUCTIONS (289 ko)
   SONY VAIO VPC-CW17FX/B OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS (276 ko)

Manual abstract: user guide SONY VAIO VPC-CW17FX/B

Detailed instructions for use are in the User's Guide.

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 98/2000/NT/XP/Vista are registered trademarks of Microsoft Corporation. [. . . ] [S3] The S3 sleep mode is a lower power state where the in formation of system configuration and open applications/files is saved to main memory that remains powered while most other hardware components turn off to save energy. The information stored in memory will be used to restore the system when a "wake up" event occurs. 3-15 M S-7379 M ainboard Re-Call VGA BIOS from S3 Selecting [Enabled] allows BIOS to call VGA BIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. Suspend Time Out (M inute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Power Button Function This feature sets the function of the power button. Settings are: [On/ Off] The power button functions as normal power off button. [Suspend] W hen you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore On AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Off] Always leaves the computer in the power off state. [Last State] Restores the system to the status before power failure or interrupt occurred. Intel EIST The Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field will appear after you installed the CPU which support speedstep technology. Adjust CPU FSB Frequency This item allows you to select the CPU Front Side Bus clock frequency (in MHz). This field will available after you installed the CPU which support speedstep technology. Advance DRAM Configuration Press <Enter> to enter the sub-menu and the following screen appears. 3-21 M S-7379 M ainboard Configuration DRAM Timing by SPD Setting to [Enabled] enables DRAM CAS# Latency automatically to be determined by BIOS based on the configurations on the SPD (Serial Presence Detect) EEPROM on the DRAM module. DRAM CAS# Latency W hen the Configuration DRAM Timing by SPD sets to [Disabled], the field is adjustable. This controls the CAS latency, which determines the timing delay (in clock cycles) before SDRAM starts a read command after receiving it. DRAM RAS# to CAS# Delay W hen the Configuration DRAM Timing by SPD sets to [Disabled], the field is adjustable. W hen DRAM is refreshed, both rows and columns are addressed separately. This setup item allows you to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe). DRAM RAS# Precharge W hen the Configuration DRAM Timing by SPD sets to [Disabled], this field is adjustable. This setting controls the number of cycles for Row Address Strobe (RAS) to be allowed to precharge. [. . . ] Both read and wri te perf ormanc e us ually increase, but can be hard to predict how much. Reads are similar to RAID-0 reads, writes can be either rather C-17 M S-7379 M ainboard expensive (requiring read-in prior to write, in order to be able to calculate the correct parity information), or similar to RAID-1 writes. The write efficiency depends heavily on the amount of memory in the machine, and the usage pattern of the array. Even though 128KB is the recommended setting for most users, you should choose the strip size value which is best suited to your specific RAID usage model. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-CW17FX/B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-CW17FX/B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.