User manual SONY VPCEH12FX/L

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEH12FX/L. We hope that this SONY VPCEH12FX/L user guide will be useful to you.


SONY VPCEH12FX/L : Download the complete user guide (2108 Ko)

Manual abstract: user guide SONY VPCEH12FX/L

Detailed instructions for use are in the User's Guide.

[. . . ] Inserting objects can result in injury due to the high speed rotation of internal fans. Do not connect the grounding wire to gas pipe, water pipe, lightning rod or telephone grounding wire. A burning smell), stop the operation immediately and turn the circuit breaker OFF. Improper cable connection can cause the power supply cord, plug and the electrical outlet to overheat and cause fire. [. . . ] (¡C) the figures in ( ) are temperature settings TIPS ABOUT INDICATOR PANEL The indicator panel will change each time you press the DISPLAY button in the following manner. dISPLAY FULL POWER (AY-XPM7CR/AY-XPM9CR/AY-XPM12CR) (AY-XM7CR/AY-XM9CR/AY-XM12CR) ECO POWER MONITOR Room Temp. Temperature Lamp Indiactor The room temperature and POWER MONITOR are displayed. Lamp POWER MONITOR When the room temperature or the outdoor temperature is displayed, the POWER MONITOR will light up in 4 levels for COOL and HEAT modes (3 levels for DRY mode), to indicate the operation power. When the air conditioner is operating at maximum power in the COOL and HEAT modes, "POWER" will light and "ECO" will turn off on the indicator panel. NOTES: • The displayed temperatures are rough estimates and may vary from the actual temperatures. € Temperature display ranges Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher than 40°C) Outdoor temperature: -9°C ~ 45°C ( is displayed when less than -9°C and when higher than 45°C) • is displayed during the first 120 seconds of operation while the temperatures are being detected. (Temperature detection may more than 120seconds when other unit(s) is/are already being operated. ) • is displayed for 5 seconds when the unit is not in operation. E-11 ENGLISH • During operation, if the outdoor temperature changes, the temperature settings will automatically slide as shown in the chart. € Mode of the unit operated first will have priority over other unit(s) without reference to the chart. COMBINED USE OF ON AND OFF TIMERS You can use the ON and OFF timers in combination. And resume operation (With the same mode and temperature settings) to bring the room temperature to the desired level by 7:00 a. The arrow ( or ) between the TIMER ON indicator and the TIMER OFF indicator shows which timer will activate first. NOTES: • You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at different temperatures or other settings. ON indicator 2 The TIMER or REVERSEwill blink; press the TIME ADVANCE buttons to set the de- TIPS ABOUT PLASMACLUSTER OPERATION (only for models AY-XPM7CR/AY-XPM9CR/AY-XPM12CR) The ionizer inside the air conditioner will release cluster ions, which are collective mass of positive and negative ions, into the room. REFRESHING OPERATION It is said that plenty of negative ions exist in places such as waterfalls or forests in natural environment. In this operation mode, negative inos will be released in an increased rate, in order to bring the room air close to this condition. pLASMACLUSTER AUTO OPERATION Dust sensor and odor sensor will detect foul air in the room. Air Clean Operation will be performed for one minute after the air conditioner is operated to detect foul air. air Clean Operation and Refreshing Operation will be selected and be performed automatically depending on the air foul degree. Air Clean Operation will be performed when the air is detected to be foul, Refreshing Operation will be performed when the air is clean. [. . . ] (4 seconds later, a long BEEP will be emitted, and the temperature indicator on the indicator panel will indicate " " and the OPERATION lamp and TIMER lamp will blink alternately. ) • When one indoor unit is operating in HEAT mode, you can not operate the other unit in COOL nor DRY mode. (4 seconds later, a long BEEP will be emitted, and the temperature indicator on the indicator panel will indicate " " and the OPERATION lamp and TIMER lamp will blink alternately. This sound is generated by the friction of the front panel and other components expanding or connecting due to a temperature change. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEH12FX/L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEH12FX/L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.