User manual TP-LINK TL-SF1016

[. . . ] 71035627 User's Guide TL-SF1016 TL-SF1024 TL-SF1048 µÖ½µÆ÷ ÷Æâ÷ 16/24/48-port 10/100M Fast Ethernet Switch Rev 4. 0 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. [. . . ] Each port of the TLSF1016/TL-SF1024/TL-SF1048 supports auto MDI/MDI-X function, eliminating the need for crossover cables or Uplink ports. The Switch is Plugand-Play and any port can be simply plugged into a server, a hub or a switch, using straight cable or crossover cable. The TP-LINK TL-SF1016/TL-SF1024/TL-SF1048 16/24/48-port 10/100M 1 TL-SF1016/TL-SF1024/TL-SF1048 10/100M Fast Ethernet Switch User's Guide TL-SF1016/TL-SF1024/TL-SF1048 10/100M Fast Ethernet Switch User's Guide switch provides you with a low-cost, easy-to-use, high-performance, seamless and standard upgrade to improve your old network to a 100Mbps network. It will boost your network performance up to full duplex data transfer. 2. 2 Mounting the Switch in a Rack The dimension of TL-SF1016/TL-SF1024/TL-SF1048 is designed according to the standard 19" rack-mountable steel case of Electronic Industries Association. Power off all the equipment connected to the Switch before mounting it in the rack, then rivet the two "L" brackets onto each side of the Switch, and fasten it with screws in the rack. 1. 2 Ø Ø Features Complies with IEEE802. 3, IEEE802. 3u standards 16/24/48 10/100Mbps Auto-Negotiation RJ45 ports supporting AutoMDI/MDIX Supports IEEE802. 3X flow control for full-duplex mode and backpressure for half-duplex mode Ø TL-SF102 Power 1 3 5 7 9 4 Link Act 100Mbps Link Act 100Mbps 11 13 15 17 19 21 23 1 3 2 5 Ø Ø Ø LED indicators for monitoring power, link, activity, speed (TL-SF1024) Standard 19" rack-mountable steel case Internal power supply 4 6 8 7 10/100Mbps Fast Ethern 10 12 14 16 18 20 22 24 9 11 13 et Switch 15 17 19 21 23 2 4 6 8 10 12 14 16 18 20 22 24 Figure 2-1 Rivet the "L" brackets onto the Switch Chapter 2: Installation 2. 1 Mounting the Switch on a Desk TL-SF1024 Power 1 3 5 7 9 11 13 15 17 19 21 23 Before placing the Switch on a desk, attach four rubber feet to the flutes on the Switch bottom, then lay the Switch on the desktop, where it is able to withstand 5kg of weight. Note: Make sure there is a grounded AC outlet within 1. 5 meters, and working well; Make sure there is free space for radiating heat and airflow. Be sure not to lay anything heavy on top. 2 4 6 Link Act 100Mbps Link Act 100Mbps 1 3 5 7 9 11 13 15 10/100Mbps 8 10 12 14 16 18 20 22 24 17 19 21 23 Fast Ethernet Switch 2 4 6 8 10 12 14 16 18 20 22 24 Figure 2-2 Fasten the Switch in the Rack 2 3 TL-SF1016/TL-SF1024/TL-SF1048 10/100M Fast Ethernet Switch User's Guide TL-SF1016/TL-SF1024/TL-SF1048 10/100M Fast Ethernet Switch User's Guide 2. 3 Power on 100-240V~ 50-60Hz 0. 6A The TL-SF1016/TL-SF1024/TL-SF1048 16/24/48-port 10/100M Switch is powered by an AC Power Supply. Powering on the Switch, it will be automatically initialized and the LED indicators should respond as follows: 1) All of the LED indicators will flash momentarily for one second, which represent a resetting of the system. [. . . ] E-mail: support@tp-link. com Website: http://www. tp-link. com 100-240V~ 50-60Hz (Internal universal power supply) -40~70 10%~90% non-condensing 5%~95% non-condensing 6 7 [. . . ]