User manual VIVITAR VIVICAM 3305

[. . . ] Vivicam 3305 User Manual English 021009 Warranty Policy This camera is under warranty for one full year from the date of purchase by the orignal purchaser. In case of defects in materials or workmanship, we will replace or repair the camera free of charge. This warranty does not include batteries, or other accessories which have not been manufactured by our company. This warranty will not be honored if the camera has been mishandled or tampered with, or altered by anyone other than the manufacturer. [. . . ] 19 If there is no image stored in the memory a "No Picture" message pops up. You can review the recorded images on the LCD Monitor or on a TV. How to set the focus? Before taking a picture, you may need to set the focus. The camera provides 2 different type for your selection: Mode Icon Portrait/Telephoto Icon Close-up Simply switch the Focus knob to select one. Effective Range Description For a normal/long distance shot (60CM~ ) For a macro shot(30-60CM) 20 8 How to set the image resolution & quality ? This camera provides 6 different image resolution & quality combination settings: 1280x960 pixels resolution with Normal ( ), Fine( ), Super Fine( )quality. 640x480 pixels resolution with Normal ( ), Fine( ), Super Fine( )quality. To change the resolution & quality setting, perform the following: 1. The setting is conserved even if the camera power is off. Resolution Indicator In RECORD mode: Shows the captured image resolution setting. In PLAY mode: Shows the currently displayed image resolution setting. Image Quality Indicator In RECORD mode: Shows the captured image quality setting. In PLAY mode: Shows the currently displayed image quality setting. 21 Resolution 1280x960 1280x960 1280x960 640x480 640x480 640x480 Quality Compression Ratio 20:1 12:1 8:1 16:1 8:1 4:1 The setting is conserved even if the camera power is off. How to set the Flash? The Flash Mode can only be set under RECORD mode. To change the setting, press the Flash Mode button a number of times until the desired one is selected. Mode Auto Red-Eye Fill-In Off Description Flash is enabled automatically when light level is less than LV 10. 0 Auto Mode with Pre-Flash to reduce red eye effect Flash is always enabled Flash is always disabled 22 Advanced Operation How to adjust the EV compensation? To adjust the EV compensation, perform the following: 1. This setting is reset to AUTO when the camera power is off. How to adjust the White Balance? To adjust the White Balance, perform the following: 1. This setting is reset to AUTO when the camera power is off. 23 How to set the OSD (On-Screen Display) language? To set the OSD language, perform the following: 1. The setting is conserved even if the camera power is off. How to set the Self-Timer? The self-timer can only be set under RECORD mode. After 10 seconds, an image is captured and the timer will turn itself off. In the first 7 seconds, the indicator blinks at a rate relatively slow and then blinks rapidly for the last 3 seconds. How to format the CF (Compact Flash ) card? To format the CF card, perform the following: 1. 24 TM Operating Modes and Menus RECORD Mode Set the operating mode to RECORD for image capturing. mode, the Record menu appears. Record Menu Press the Menu button in RECORD The menu contains the following items: LCD BRIGHTNESS: Changes the brightness setting (-5 ~ +5, Interval = 1) of the LCD display. The cursor returns to the RECORD menu automatically when the change is made. Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor returns to the Record menu automatically when the change is made. WHITE BALANCE: Select either one of the 5 (Auto, Daylight, Shade, Fluorescent, Tungsten) manual white balance settings. [. . . ] Follow the procedure in Step 4 to view the panorama in action. Step 6: Save a Panorama After Step5, you can save the panorama from the Stitched Result window as a BMP, Flashpix (FPX), or JPEG file. MGI PhotoVista also automatically creates an IVR file for you, which you use to play the panorama. 38 Additional Information Names and Functions Viewfinder Window The optical viewfinder is the real-image type with 5% alignment tolerance. LCD Monitor When you are about to take a picture, you may use the LCD monitor to frame the image. Display Button The LCD button is only active in RECORD and PLAY modes. [. . . ]