User manual WHIRLPOOL 5634 F/1 GEBRUIKSAANWIJZING

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL 5634 F/1. We hope that this WHIRLPOOL 5634 F/1 user guide will be useful to you.


WHIRLPOOL 5634 F/1 GEBRUIKSAANWIJZING: Download the complete user guide (210 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL 5634 F/1 MODE D'EMPLOI (237 ko)
   WHIRLPOOL 5634 F/1 BEDIENUNGSANLEITUNG (283 ko)
   WHIRLPOOL 5634 F/1 INSTRUZIONI PER L'USO (210 ko)
   WHIRLPOOL 5634 F/1 LIBRO DE INSTRUCCIONES (213 ko)

Manual abstract: user guide WHIRLPOOL 5634 F/1GEBRUIKSAANWIJZING

Detailed instructions for use are in the User's Guide.

[. . . ] Made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. curtains and delicate clothing , dresses skirts , shirts and blouses. Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. [. . . ] The indication lamp next to the “Start (Pause)” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phase is finished, the corresponding indication goes out. €œDOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. RED INDICATIONS “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). PROGRAMME END • All the lights of the programme sequence indicator are off, and the “Door open” indication lights up. Turn the programme selector to the “Off/O” position. Press the “Start (Pause)” button to pause the programme. Select the new programme (with temperature), any options and another spin speed if you want. The new programme continues at the same position where the previous programme was interrupted. [. . . ] SELECT ANY DESIRED OPTION Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. €œHalf load” button • Reduces water consumption, above all during rinsing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL 5634 F/1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL 5634 F/1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.