User manual WHIRLPOOL ADG8777FD

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL ADG8777FD. We hope that this WHIRLPOOL ADG8777FD user guide will be useful to you.


WHIRLPOOL ADG8777FD : Download the complete user guide (4403 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL ADG8777FD (4413 ko)

Manual abstract: user guide WHIRLPOOL ADG8777FD

Detailed instructions for use are in the User's Guide.

[. . . ] Quick reference guide Chart BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS! (see at right for options description) PROGRAM SELECTION BUTTON Push “P” button (repeatedly) until selected program number is shown on the display (P1. . . Px) - see “Table of programs” below. START/RESUME BUTTON Push this button to start the selected program: the indicator lights up and goes off at the end of the program. When the door is opened during a washing cycle, the cycle is temporarily paused: the Start indicator blinks. To resume the cycle push Start button and close the door within 3 seconds. CANCEL/OFF BUTTON Push this button to switch off the control panel. If pressed when a program is running it cancels the program ongoing draining water for 1 minute. [. . . ] A - CLOSED A - OPEN C D CLICK! Rotate the flap Rotate the flap clockwise and clockwise and hook on rack. hook on rack A LOWER RACK - depending on the model A How to use PowerClean® B D - CLOSED D - OPEN PowerClean® uses the special water jets in the rear of cavity to wash more intensively the high dirty items. 1. Adjust the PowerClean® area (G) folding down the rear plate holders to load pots. 2. Pots have to be inclined towards the power water jets. E - Cutlery basket F - Grid: helps to keep the cutlery separate for better washing results. H - Lateral support with foldable flaps (if available): shelves can be used to hold long tools or cups onto. THE LATERAL SUPPORT CAN BE REMOVED: pull the support to the front of the basket and lift to remove it. F G E 5 Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Do not use the dishwasher for washing wooden items, aluminium, tin, silver cutlery or decorated crockery (unglazed). Insert 10 Rectifying minor faults yourself. . . Insert and screw on upper and lower arms tightly. Unscrew and remove upper arm. . . 2 1 Spray arms Remove blockages/ deposits. Unscrew and remove lower arm. . . Clean spray nozzles under running water (use toothpicks if necessary). . . 5 6 EN -5- What to do if. . . If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem. Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation. salt indicator is lit rinse aid indicator is lit . . . is not working/will not start - Possible causes. . . Salt reservoir is empty. (After refill the sale indicator may remain lit at the end of several wash cycles). - Solutions. . . Refill reservoir with salt (for more information - see page 2) Adjust water hardness - see table, page 2 Refill dispenser with rinse aid (for more information - see page 3) Check the household circuit fuse if there is no power supply. Check whether the “Delayed start” option (if available) has been selected. If it has, the appliance will only start once the set time has elapsed. If necessary, RESET the appliance by pressing CANCEL or start the cycle immediately by pressing START. The water tap must be fully open during water inlet (minimum capacity: 0. 5 litres per minute). The water inlet hose must not be bent and the relative inlet filter in the water tap connector must not be dirty or clogged. The drain hose must be fitted correctly (for high mounted appliances, leave min. 200-400 mm from the lower edge of the appliance) - see Assembly instructions. Close the water tap. . . . shows “F6 E7” or “F6 E1” or “H2O” - . . . shows “F6 E3”/wash program ended too early (dishes are dirty and wet) - . . . shows “F8 E1” - . . . shows other fault display “Fx Ey” is lit - After taking the above course of action, the fault message must be reset. Possible causes. . . Too little space between dishes (incorrect arrangement of the concave items in the rack). [. . . ] Cleaning and user maintenance shall not be made by children without supervision. - Do not store flammable materials in close proximity to the dishwasher. - The open dishwasher door can only support the weight of the loaded rack when pulled out. The guarantee is not applicable if faults are caused by incorrect use of the appliance. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL ADG8777FD




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL ADG8777FD will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.