User manual WHIRLPOOL ADP 8500 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL ADP 8500. We hope that this WHIRLPOOL ADP 8500 user guide will be useful to you.


WHIRLPOOL ADP 8500 INSTRUCTION FOR USE: Download the complete user guide (213 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL ADP 8500 BEDIENUNGSANLEITUNG (199 ko)
   WHIRLPOOL ADP 8500 BEDIENUNGSANLEITUNG (199 ko)

Manual abstract: user guide WHIRLPOOL ADP 8500INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Store the detergent, rinse aid and salt in a dry place out of the reach of children. General recommendations: The open dishwasher door can only support the weight of the loaded rack when pulled out. Do not rest objects on the open door or sit or stand on it: the appliance may topple over!Only use detergents, rinse aids and regeneration salts specially recommended for use in domestic dishwashers. [. . . ] • Make sure the inlet and drain hoses are kinkfree and are not crushed. • If the hose length is not sufficient, please contact your local dealer or our After-Sales Service. • The inlet hose must be securely screwed on to the water tap to prevent leaks. • The inlet water temperature varies according to the model installed: inlet hose marked “25° C Max”: maximum temperature 25° C. • When installing the appliance, make sure the drain water discharges correctly (if necessary, remove the plug from the sink spigot). • Fix the drain hose to the spigot with a clamp to prevent it from coming off during operation. • For appliances with water-stop system only: if the water connections are made correctly, the water-stop system safeguards your home against damage caused by flooding. Electrical connection: • Closely adhere to local Electricity Board regulations. • Voltage information is shown on the rating plate mounted inside the door on the right hand side. • The power cable must only be replaced by a qualified technician. • For Austria: if the apparatus is series connected to a fault current switch, this must be sensitive to the pulsating current. 12 ELECTRICAL CONNECTION For Great Britain Only The wires in the mains lead are coloured in accordance with the following code: BLUE - “NEUTRAL” (“N”) BROWN- “LIVE” (“L”) GREEN AND YELLOW - “EARTH” (“E”) 1. This prevents the formation of excess suds which may spoil washing results. Thereafter, regularly check the rinse aid level. How to adjust the rinse aid dosage regulator: Factory setting: position 4. If you are not satisfied with washing or drying results, change the rinse aid dosage setting. If crockery is prone to whitish streaks, reduce the dosage by turning the dial to a lower setting (1-3) using a coin or the like. If crockery is not perfectly dry, increase the dosage by turning the dial to a higher setting (5-6). Close the cover again. Rinse aid level indicator: Visual indicator: light dark = = add rinse aid sufficient rinse aid . . Additional electric indicator (if provided): The indicator lamp on the control panel lights up when more rinse aid needs to be added. 15 HOW TO FILL THE DETERGENT DISPENSER A small compartment compartment detergent. and a large are provided for the The use of detergent in excess of the recommended dosage may cause pollution. If you use detergents in pellet form, follow the manufacturer’s directions for use. “New generation” detergents contain enzymes that give better washing results when Bio programmes are used. However, these programmes are also suitable for all other dishwasher detergents. [. . . ] Cleaning the outside of the appliance: To clean the outside of the appliance, use a neutral detergent and a damp cloth. Cleaning the inside of the dishwasher: Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. Slacken the fixing nut (A) (by turning it counter-clockwise) and detach the spray arm (B) by pulling it down. Remount the spray arm by aligning it with the rotary mounting and insert it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL ADP 8500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL ADP 8500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.