User manual WHIRLPOOL ARC 4020/IX INSTRUCTION FOR USE

[. . . ] After unpacking the appliance, check for damage and make sure that the doors shut properly. Any damage must be reported to your dealer within 24 hours after delivery of the appliance. 2. Wait at least two hours without moving the appliance before switching on. This will give the refrigerant circuit time to settle and operate efficiently. [. . . ] For this reason the refrigerator is equipped with a deodoriser that acts like a filter and eliminates the worry of storing strong odour savoury foods with more delicate sweet foods. The deodoriser is located in the cool air duct. MULTI-FLOW HOW TO OPERATE THE “EXTRA-COLD” COMPARTMENT The temperature inside this compartment is maintained constant and is colder than in other parts of the refrigerator. Dairy products can be stored in this compartment longer and drinks are chilled more rapidly; It can be used to store dairy products, cold meats and meat. • If necessary, remove the extra-cold compartment, taking all the food out first. Then, holding the compartment with both hands, carefully lift it up and out. • It is not advisable to remove the tilting door from the extra-cold compartment. 18 3gb33008. fm Page 19 Monday, December 9, 2002 3:59 PM HOW TO OPERATE THE FREEZER COMPARTMENT The freezer compartment can be used for freezing fresh and cooked food, making ice cubes and storing frozen food. Freezer control panel • To adjust the temperature in the Freezer compartment, select the desired freezing level using the button on the control panel. 1 2 3 4 1. 4. Operation LED Door open alarm Alarm mute button Fast Freezing Minimum level: to be used when small amounts of food are stored in the Freezer and the door is seldom opened. Maximum level: to be used when large amounts of food are stored in the Freezer and the door is opened frequently. This function switches off automatically after 18 hours. ELECTRONIC CONTROL This appliance is provided with an exclusive electronic control system. • In the event of a malfunction, the control system will activate an acoustic alarm and the LEDs on the control panel will blink. • This system also controls the internal temperature of the appliance. An acoustic alarm will immediately signal any malfunction in your appliance. This allows you to contact the After-sales Service to solve the problem rapidly. • When the LEDs blink, the appliance should not to used for a prolonged period of time. Unplug the appliance from the mains socket until the problem is solved by the After-sales Service. 19 3gb33008. fm Page 20 Monday, December 9, 2002 3:59 PM Important: • After switching on, the freezer compartment takes approximately 3 hours to reach a suitable temperature for frozen food storage. How to freeze fresh food You can use the freezer compartment to freeze food. The amount of fresh food that can be frozen in 24 hours, at an ambient temperature of + 25°C, is indicated on the data plate. Wrap and seal the food in aluminium foil, cling film, air and water-tight plastic bags, polythene containers with lids, freezer containers. 3. Place food in the upper part of the freezer, leaving enough space for air to circulate around packs. 4. For more efficient freezing, use the fast freeze function for the next 24 hours. Note: • In the event of a power failure, the freezer compartment maintains the correct storage temperature for about 9/10 hours. [. . . ] The Manufacturer declines all liabilities for injury to persons or damage to property resulting from failure to observe these regulations. • If the plug and socket are not of the same type, have the socket replaced by a qualified electrician. • Do not use extension cables, multiple sockets or adapters. Disconnecting the appliance It must be possible to disconnect the appliance by unplugging it or by means of a two-pole switch fitted upline of the socket. 23 3gb33008. fm Page 24 Monday, December 9, 2002 3:59 PM ELECTRICAL CONNECTION For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A. S. T. A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover (A) and fuse (B). [. . . ]