User manual WHIRLPOOL ASC 16 IG INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL ASC 16 IG. We hope that this WHIRLPOOL ASC 16 IG user guide will be useful to you.


WHIRLPOOL ASC 16 IG INSTRUCTION FOR USE: Download the complete user guide (445 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL ASC 16 IG KURZANLEITUNG (359 ko)
   WHIRLPOOL ASC 16 IG SCHEDA PROGRAMMI (91 ko)
   WHIRLPOOL ASC 16 IG INSTRUZIONI PER L'USO (456 ko)
   WHIRLPOOL ASC 16 IG TABLEAU DE PROGRAMMES (361 ko)
   WHIRLPOOL ASC 16 IG PRODUCT-INFORMATIEBLAD (358 ko)
   WHIRLPOOL ASC 16 IG PROGRAM CHART (90 ko)

Manual abstract: user guide WHIRLPOOL ASC 16 IGINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • After installation access to the mains plug has to be guaranteed, or the all-pole disconnection has to be possible with a switch. Installation • Do not install your dryer where it can be subject to extreme conditions, such as: poor ventilation, temperatures around freezing or above 35° C. • Before running the first cycle ensure the water container and heat exchanger are correctly positioned. • Only for water container top version: if possible use the hose supplied to drain the water directly into the domestic plumbing system. [. . . ] • Always select the correct programme/drying time for the load in order to obtain the desired drying results. Start with the iron dry programme/drying time setting, remove the laundry to be ironed at the end of that cycle and dry the remainder of the load on the cupboard dry setting. The dryer must be disposed of in compliance with local waste disposal regulations. • Before scrapping, cut off the power cable so that the dryer cannot be connected to the mains. General recommendations: • Always set the programme/time selector knob to the “0” position after use. This prevents the dryer from being switched on accidentally. • Before cleaning or carrying out maintenance, switch off the dryer and disconnect it from the mains supply. • To clean the outside of the dryer, use a neutral detergent and a damp cloth. • Wipe away lint from the door seal and the door using a damp cloth. 13 clean, from time to time, the complete filter area (including below the filter) with a brush, a damp cloth or with a vacuum cleaner. • If necessary, the power cable may be replaced with an identical one obtained from our After-Sales Service. EC Declaration of Conformity • This dryer has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: • 73/23/EEC Low Voltage Directive • 89/336/EEC EMC Directive • 93/68/EEC CE Marking Directive. • The dryer must only be used in the household for the prescribed uses. DESCRIPTION OF THE DRYER A. Heat exchanger. A B2 C F E G D H B1 Reminder - Maintenance and Cleaning Clean the lint filter at the end of every drying cycle. Open the door Pull the filter upwards Open the filter Remove lint using a soft brush or your fingertips Close the filter Push the filter back into place. Heat exchanger Clean the heat exchanger at least every 3 months (See "CONDENSER" chapter). Wipe away any lint/fluff from the door seal and interior using a damp cloth. 14 DRAINAGE SYSTEM For water container top only To avoid having to empty the water container at the end of each cycle, the condensation water can be drained away. Note: if the drain hose is not supplied, the optional accessory AMH 883 kit, available at your dealer, should be used. Remove the hose located at the lower rear part of the dryer and insert it in the nearby hole. The height difference between the two drainage connections should not exceed 1m. Notice: To avoid siphoning, the end of the hose must not be immersed in the drain water. Avoid bending and twisting the hose. B C 15 DOOR REVERSIBILITY / CHILD SAFETY LOCK Door Reversibility A. Using a spanner, turn the contact pin in the upper part of the door by 90° and remove it. C D. [. . . ] • Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm?When the spinning speed is less than 800 rpm the water container fault may occur during the drying cycle)?(refer to the Instructions for use) • Is the ambient temperature too high?The dryer does not operate: (after a power failure and/or interruption to the mains supply, always press the Start/Pause button). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL ASC 16 IG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL ASC 16 IG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.