User manual WHIRLPOOL AWE9999GG

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWE9999GG. We hope that this WHIRLPOOL AWE9999GG user guide will be useful to you.


WHIRLPOOL AWE9999GG : Download the complete user guide (1143 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWE9999GG (1083 ko)

Manual abstract: user guide WHIRLPOOL AWE9999GG

Detailed instructions for use are in the User's Guide.

[. . . ] Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. White and pastel shaded garments made of delicate fabrics. 4. 0 Special programme to reduce colour fading and local discolouration. Prefer to use a liquid 6. 5 2. 5 3. 0 6. 5 - Nuit Silence cold - 60°C Aqua co cold - 40°C cold - 30°C 40 - 60°C - Chrono 15’ Coton Rinçage & Essorage detergent for dark garments with this programme. Programme optimized for silent washing and spinning, for example during the night. [. . . ] To remove it again, keep on pressing the button until you see the value “0:00”. • When you have selected the desired time until the cycle end, press “Start/Pause” - the countdown will begin. • During the countdown, you can still modify the programme setting (select or deselect options, change spin speed etc. ). If the modifications prolong the programme duration so that it overruns the originally set time until the cycle end, the programme will start immediately. • Sometimes the programme may finish before the selected time until the cycle end has expired (e. g. In this case, the washing machine will tumble the laundry regularly to keep it fresh, until the selected cycle end time has expired. The tumbling phase can be stopped at any time either by pressing any button or by rotating the programme selector; the animation will stop and the door will unlock in about 1 minute as indicated on the display. Load (kg) 3. 0 6. 5 6. 5 6. 5 3. 0 3. 0 1. 5 1. 0 4. 0 6. 5 4. 0 4. 0 6. 5 2. 5 3. 0 6. 5 3. 25 6. 5 3. 25 Water (l) 45 55* 51 51 54* 50 50 40 41 51 67 41 51 19 30 48 34 48 34 without “Rapid” Energy (kWh) 0. 43 1. 90 1. 10 0. 67 0. 85 0. 50 0. 55 0. 55 0. 58 0. 65 0. 50 0. 58 0. 84 0. 43 0. 15 0. 67 0. 57 0. 65 0. 46 Approx. Programme Duration (hrs : min) without “Rapid” with “Rapid” 1:00 2:35 2:30 2:20 1:55 1:40 0:45 0:35 1:30 2:45 1:20 1:40 4:00 1:00 0:15 4:00 2:30 3:15 2:30 – 2:00 1:45 1:30 1:14 0:59 – – 1:10 – 1:00 1:10 – – – – – – – variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display. “LID OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”. CHILD LOCK BUTTONS You can lock the buttons of the control panel against improper use (e. g. • Press both of the child lock buttons simultaneously and hold them for at least 3 seconds. • To unlock the buttons again: proceed in the same way. FINISH ON TIME FAILURE INDICATIONS In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use. “Service” Failure or malfunction of an electrical component. Spin speed on display blinks: unbalance during spinning Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature. PROGRAMME END • The “Door open” indication lights up and the display shows “End”. After about a quarter of an hour, the washing machine will switch off completely to save energy. 4. Leave the lid open for some time to allow the interior of the machine to dry. ADD DETERGENTS, CLOSE THE LID AND SELECT THE PROGRAMME Add detergent as indicated an the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. The display shows the programme duration in hours and minutes as well as the predefined temperature. [. . . ] This depends on the programme, temperature and options selected, and also on the size of the wash load. For that reason, the forecasted degree of power consumption may adapt when the washing machine detects the wash load. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start/Pause” button to pause the programme. 2. Select the new programme, temperature, any options and another spin speed if you want. The new programme continues at the same position where the previous programme was interrupted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWE9999GG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWE9999GG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.