User manual WHIRLPOOL AWO/C M8123 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWO/C M8123. We hope that this WHIRLPOOL AWO/C M8123 user guide will be useful to you.


WHIRLPOOL AWO/C M8123 INSTRUCTION FOR USE: Download the complete user guide (1969 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWO/C M8123 MODE D'EMPLOI (1974 ko)
   WHIRLPOOL AWO/C M8123 PRODUCT FICHE (59 ko)

Manual abstract: user guide WHIRLPOOL AWO/C M8123INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] 1000 1) 1000 1) White Colours Light colours Dark EcoCotton AquaEco Speed 15 Jeans Spin Rinse & Spin cold - 60 °C cold - 60 °C cold - 60 °C cold - 60 °C cold - 40 °C cold - 30 °C cold - 60 °C 7. 0 Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition 4. 0 Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. White and pastel shaded garments made of delicate fabrics. Yes Yes Yes Yes Yes Yes Yes max. [. . . ] The tumbling phase can be stopped at any time either by pressing any button or by rotating the programme selector; the animation will stop and the door will unlock in about 1 minute as indicated on the display. CHILD LOCK Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock: • Turn the programme selector to a programme position, or run a programme as usual. • Press and hold the 2 buttons marked with the key symbol simultaneously for a few seconds. A key-like symbol will shortly appear on the display to indicate that the child lock is active. Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock: • Press and hold again the 2 buttons marked with the key symbol simultaneously for a few seconds. FAILURE INDICATORS If one of the failure indicators blinks, consult the “Troubleshooting Guide” in your Instructions for Use. “Service”: failure or malfunction of an electrical component. Spin speed on display blinks: unbalance during spinning. Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. Automatic adaptation of programme duration after detection of wash load. DETERGENT DOSING RECOMMENDATION With the “Dosing Aid” button, you can make your washing machine indicate you the recommended detergent quantity for your wash load, depending on the soil level selected and the size of the load. [. . . ] The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. less more The indicator on the left is to show that the “Eco monitor” is active. The four indicators next to it show the degree of consumption: the less power your programme setting is forecasted to consume, the less indicators will light up. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWO/C M8123




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWO/C M8123 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.