User manual WHIRLPOOL AZA-HP 9682 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AZA-HP 9682. We hope that this WHIRLPOOL AZA-HP 9682 user guide will be useful to you.


WHIRLPOOL AZA-HP 9682 INSTRUCTION FOR USE: Download the complete user guide (2606 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AZA-HP 9682 MODE D'EMPLOI (2630 ko)
   WHIRLPOOL AZA-HP 9682 TABLEAU DE PROGRAMMES (339 ko)
   WHIRLPOOL AZA-HP 9682 PROGRAM CHART (338 ko)
   WHIRLPOOL AZA-HP 9682 MODE D'EMPLOI (2630 ko)

Manual abstract: user guide WHIRLPOOL AZA-HP 9682INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • The replacement of the light bulb is only to be carried out by the After-Sales-Service. Installation • Do not install your dryer where it can be subject to extreme condition, such as: poor ventilation, temperature below 5°C or above 35°C. • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way, that a full opening of the tumble dryer door is restricted. • Small storage rooms located inside, bathrooms, toilets, showers, etc. [. . . ] • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Stacking kit • Depending on the model of your washing machine, your dyer can be stacked on top of your front loading washing machine. For further information please contact the After-Sales-Service. 4 SAFETY ADVICES AND GENERAL RECOMMENDATIONS • To minimize the risk of fire in a tumble dryer, the following should be observed: • For energy declaration measurements the filter meshes of the door filter and the bottom filter have to be cleaned after each single cycle. Also the filter foam of the bottom filter has to be cleaned after each cycle under running water. • The filter meshes and filter foam have to be dry when inserted in the dryer, before starting a new drying cycle. • Always set the programme/time selector knob to the “0” position after use. • Before cleaning or carrying out maintenance switch off the dryer and disconnect it from the mains supply. • To clean the outside of the dryer, use a neutral detergent and a damp cloth. • The final phase of a drying cycle always occurs without heat (cool down phase) to ensure that the items are left at a temperature that ensures that the items will not be damaged. • Wipe away lint from the door seal and the door using a damp cloth. Disposal must be carried out in accordance with local environmental regulations for waste disposal. • For more detailed information about treatment, recovery and recycling of this product please contact your local city office, your household waste disposal service or the shop where you purchased the product. Energy saving tips • Always dry a full load: depending on the type of laundry and the programme/drying time. • Use the maximum spin speed allowed by your washing machine, since draining the water mechanically requires less energy. • Place your dryer in a room with a temperature between 15° C and 20° C. • Always select the correct programme/ drying time for the load in order to obtain the desired drying results. • Select the gentle option only with small loads. 6 ELECTRICAL CONNECTION 1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1 363A 13amp fused plug, to change a fuse in this type of plug use an A. S. T. A. Important: The fuse cover must be reinstalled when changing a fuse and if the fuse cover is lost, plug must not be used until a correct replacement is installed. Correct replacements are identified by the color insert or the color embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store. 2) For the Republic of Ireland only The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type. 3) Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. [. . . ] If the failure reoccurs, please call the After-Sales Service. F07 Turn the dryer OFF and unplug it. If the failure reoccurs, please call the After-Sales Service. F10 – F24 Turn the dryer OFF and unplug it. If the failure reoccurs, please call the After-Sales Service. Start LED blinks 2 times Make sure that the door is correctly closed and the bottom filter correctly per second when pressed positioned. If the failure reoccurs, please call the After-Sales Service. Bottom filter LED is blinking, Start LED blinks Make sure that the bottom filter is correctly positioned. If the failure reoccurs, please 2 times per second when call the After-Sales Service. pressed 12 TROUBLESHOOTING GUIDE/AFTER-SALES SERVICE If a fault occurs, before contacting our After-Sales Service, perform the following checks to try to remedy the problem: Drying takes too long / laundry is not dry enough: • Correct programme selected? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AZA-HP 9682




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AZA-HP 9682 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.