User manual WHIRLPOOL C 1010 IS PROGRAM CHART

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL C 1010 IS. We hope that this WHIRLPOOL C 1010 IS user guide will be useful to you.


WHIRLPOOL C 1010 IS PROGRAM CHART: Download the complete user guide (3151 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL C 1010 IS TABLEAU DE PROGRAMMES (3516 ko)

Manual abstract: user guide WHIRLPOOL C 1010 ISPROGRAM CHART

Detailed instructions for use are in the User's Guide.

[. . . ] The OK/Start lamp flashes. 4 Quickwash 40°C Delay Lightly soiled crockery, with no dried-on food. * Use of tablets not recommended. X* 13. 0 0. 70 30 3 Eco 2) 50°C Delay Normally soiled crockery. X 15. 0 1. 05 150 Intensive 70°C Delay Recommended programme for heavily soiled crockery, especially suitable for pots and pans. X 17. 0 1. 65 145 Programme data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) and may vary depending on conditions. Differences of up to 20 minutes are possible with sensor programmes as a result of the appliance’s automatic calibration system. [. . . ] Only press the OFF button once the START indicator lamp has switched off. Unload the appliance, starting from the lower rack in order to avoid any residual drips of water falling onto crockery below. Maintenance and care Maintenance and care Rotate filter cylinder, remove filter system . . . insert Screw on filter system NOTE MARK! Filters check and clean if necessary Rectifying minor faults yourself . . . 10 insert lower arm . . . clean spray nozzles under running water (use toothpicks if necessary) . . . screw on upper arm tightly Spray arms Remove blockages/ deposits. GB -5- What to do if. . . If a fault occurs, before restoring normal appliance operation. contacting the After-sales Service, make the following checks to try and remedy the problem. Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation. . . . is not working/will not start . . . shows “F1” on the display or the START indicator lamp flashes once . . . shows “F4” on the display or the START indicator lamp flashes 4 times . . . shows “F6” on the display or the START indicator lamp flashes 6 times . . . shows “F7” on the display or the START indicator lamp flashes 7 times . . . shows “F8” on the display or the START indicator lamp flashes 8 times Possible causes. . . Loading of the dishwasher using lower and upper rack at the same time with “Half load/Multizone” function. Solutions. . . - If necessary, use more detergent, observing the manufacturer’s indications as regards dosage. Always store detergent in a dry place and do not store it for excessively long periods of time. - For heavily soiled crockery, select a wash programme with a higher temperature (see table in chapter “Chart” on page 1). - If you select the “Half load/Multizone” function (if available), remember to load only the upper rack or only the lower rack to increase washing power and thus obtain optimum wash results. - In the event of frequent use of the Eco 50°C programme (if available), from time to time select the Frequent use of Eco 50°C. - The spray arms must not be clogged, the filters must not be dirty and must be fitted correctly (see Clogged spray arms; filters dirty or not fitted correctly. - The spray arms must be able to turn freely and must not be impeded by crockery or cutlery. GB -6- What to do if. . . Crockery and cutlery. . . . . . salt indicator lit . . . have deposits: regeneration salt residue . . . are not dry . . . have discoloured plastic parts . . . opaque glasses, etc . . . removable deposits on glasses . . . glasses not sparkling . . . permanent deposits on glasses Rainbow effect. Dishes unsuitable for washing in dishwashers (porcelain), Usage of incorrect programmes for glasses. - Set “Detergent type” option; if this option is not available, it is normal for the salt indicator to light up. - In areas with very hard water, more regeneration salt needs to be added (see page 2 “How to set water hardness”). - Synthetic materials do not dry well; if wet at end of cycle, wipe dry. Clean dishes left in dishwasher for a long time after end - In this situation, the presence of drops of water on dishes and on the sides of the dishwasher is normal. - Increase the dosage of rinse aid - see page 3, chapter “Adding rinse aid”. - The rapid programme is intended for quickly washing lightly soiled dishes. [. . . ] If you decide to scrap the dishwasher, it must be disposed of in compliance with local waste disposal regulations. danger of suffocation), break the lock of the door so that it can no longer be closed. - This appliance is marked according to the European directive 2002/96/CE on Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is scrapped suitably, you can help prevent potentially damaging consequences for the environment and health. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL C 1010 IS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL C 1010 IS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.