User manual WHIRLPOOL WWCR9230B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WWCR9230B. We hope that this WHIRLPOOL WWCR9230B user guide will be useful to you.


WHIRLPOOL WWCR9230B : Download the complete user guide (1122 Ko)

Manual abstract: user guide WHIRLPOOL WWCR9230B

Detailed instructions for use are in the User's Guide.

[. . . ] Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable. This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer’s recommendations on the care label. Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent. [. . . ] - To terminate the “Rinse hold” by spinning the laundry, press the “Spin” button to select the desired spin speed and then “Start/Pause” to start the spin cycle. - Do not leave the laundry to soak for too long in the “Rinse hold”. up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin. CHILD LOCK Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock: • Turn the programme selector to a programme position, or run a programme as usual. • Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. A key-like symbol will shortly appear on the display to indicate that the child lock is active. Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock: • Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. SET A START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. • Press the Start delay button to select a delay time up to 23 hours. The countdown of the delay time begins; the start delay symbol and the colon between hours and minutes blink. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. • If you use the “Dosing Aid” button: select the delay time BEFORE pressing the “Dosing Aid” button. The countdown of the selected delay time begins after having pressed the “Start/Pause” button for the second time (see separate Instructions for Use concerning the “Dosing Aid”). To cancel the “Start delay” . . . before you press the “Start/Pause” button: • Press the “Reset/Drain” button , or set the start delay time to “0:00” - the delay time disappears after a few seconds. . . . after having started the programme: - Press the “Start/Pause” button - the delay time disappears from the display. Press “Start/Pause” again if you want to start the selected programme immediately. Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. [. . . ] • If you select spin speed “0”, the final spinning is cancelled and the water is drained out only. • If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. Select the new programme, temperature, any options and another spin speed if you want. The new programme continues at the same position where the previous programme was interrupted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WWCR9230B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WWCR9230B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.