Detailed instructions for use are in the User's Guide.
[. . . ] Phaser® 4510
laser printer
User Guide
Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning
www. xerox. com/support
Copyright © 2008 Xerox Corporation. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. [. . . ] For a list of supported paper sizes, see Supported Paper and Media on page 3-3. Select Paper Tips Page, and then press the OK button.
The following paper and media cannot be used for 2-sided printing:
Transparencies Envelopes Labels Any die-cut specialty media, such as business cards
See also: Supported Paper and Media on page 3-3 Printer Configurations on page 1-4
Phaser® 4510 Laser Printer 3-23
Printing on Both Sides of the Paper
Binding Edge Options
When you use the printer driver to select 2-sided printing, also select the binding edge, which determines how the pages turn. The actual outcome depends on the orientation (portrait or landscape) of images on the page, as displayed in the following illustrations.
Portrait
Landscape
Bind on Side Edge Flip on Long Edge
Bind on Top Edge Flip on Short Edge
Bind on Side Edge Flip on Short Edge
Bind on Top Edge Flip on Long Edge
Selecting 2-Sided Printing
To select automatic 2-sided printing: 1. In the printer driver, select 2-sided printing as shown in the following table, and then press the OK button. To select automatic 2-sided printing:
Operating System Windows Vista, Windows 2000, Windows XP, or Windows Server 2003 Mac OS X, version 10. 2 and higher Steps 1. Select an option under 2-Sided Printing:
2-Sided Print 2-Sided Print, Flip on Short Edge
1. Click the Binding icon that matches the edge to bind.
See also: Loading Paper in Tray 1 on page 3-8 Loading Paper in Tray 2, 3, or 4 on page 3-12
Phaser® 4510 Laser Printer 3-24
Printing on Specialty Media
Printing on Specialty Media
This section includes:
Printing Transparencies on page 3-25 Printing Envelopes on page 3-32 Printing Labels on page 3-36 Printing Index Cards on page 3-41 Printing Custom Size Paper on page 3-43 Creating Custom Paper Types on page 3-45
Note: Machine reliability specifications may be affected by increased use of transparency, card stock, and labels. In addition, variances in machine reliability may occur due to extended use of some media types.
Printing Transparencies
Transparencies can be printed from all trays. Caution: Damage caused by using unsupported paper, transparencies, and other specialty media is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details. To order paper, transparencies, or other specialty media, contact your local reseller or go to www. xerox. com/office/4510supplies.
Guidelines
Remove all paper before loading transparencies in the tray. Handle transparencies by the edges using both hands to avoid fingerprints and creases, which may cause poor print quality. Fan transparencies before loading in the paper tray.
Phaser® 4510 Laser Printer 3-25
Printing on Specialty Media
Printing Transparencies from Tray 1
1. Remove Tray 1 from the printer by pulling out on the handle.
4510-069
2. Fan the transparencies to release sheets that are stuck together.
6360-047
Phaser® 4510 Laser Printer 3-26
Printing on Specialty Media 5. Caution: Do not load transparencies above the fill line indicated on the paper tray. In the following illustration, the lower fill line indicates the maximum fill line for transparencies.
4510-080
6. Adjust the paper guides to fit the transparencies.
4510-081
4510-082
7. If not, the transparencies may become misaligned and cause a jam.
4510-099
Phaser® 4510 Laser Printer 3-27
Printing on Specialty Media 8. Insert the tray into the tray slot, and push the tray completely into the printer.
4510-101
9. On the control panel, press the OK button if the correct transparency size and type are displayed as the current setup, or select the transparency size and type: a. [. . . ] Place the printer on a level, solid non-vibrating surface with adequate strength for the weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. Do not place the printer in locations susceptible to vibrations.
Printing Safety Guidelines
Wait 10-15 seconds between turning the printer off and on. Keep hands, hair, neckties, etc. , away from the exit and feed rollers.
When the printer is printing:
Do not remove the paper source tray that you selected in either the printer driver or control panel. [. . . ]